Laser room - tripped breaker

[okyeron (steven noreyko)]

I think I tripped a breaker in the laser room.

Plugged in shop vac to plug behind tarkin chiller. Used for a minute and then computers and stuff on that wall went dead.

No idea what to do next.

[okyeron (steven noreyko)]

Found this post and reset the breaker

(resolved) Dorian and Tarkin down -- blown circuit breaker, maybe?

Mystery for the most part is solved. I didn’t realize / forgot that Dorian and Tarkin both have 120V accessory cords in addition to their 240V main laser circuits. Both of those, their PCs, air compressors, and Dorian’s chiller are all plugged into 120V outlets on the back wall of the laser room. The tripped breaker was a 240V labeled “CRCW OUT”. My working hypothesis is somebody ran new circuits on that wall between the laser room (“ClassRoom”) and textiles (“CoWorking”) with a shared neutr…

—-

Probably a good idea to mark what outlets might be ok for shop vac.

Or - get an extension cord so the shop vac can be plugged in in the hallway