Me and my dad took some time to look at the shop vac at the sanding station and moved the shop vac to a different circuit so that it won’t trip the breaker when a machine is turned on. So please turn on the shop vac at the sanding station. This is a temporary solution until the 20 amp breaker gets put in. I put signs up to let everyone know it is working again. I was inspired by another member taking the time to inspect and clean the shop vacs.
2 Likes
We also added a quick fix to the belt sander at the sanding station to collect dust. We took an unused hose and attached it. Ultimately it would be good if the dust collector attachment was higher and smaller, maybe a good 3D printing project.
We moved the sanding station table next to the scroll saw table due to electricity needs of being on another circuit. We used masking tape to get the cords secure to the floor but it would be good if we could use some gaffer’s tape.
2 Likes