Scale issue

Space Teams CNC
1

Good morning everyone. I’m here at the space getting set up to 3D carve an MDF block and here are the issues I’m running into:

1/ I can’t jog the machine past around 38” (965.2mm) on the Y axis. The control system displays “+Lim” and blocks the gantry there.

2/ When I set my zeros at the bottom left corner of my block then jog the machine over the other sides of the block the remote control reads half of the actual dimensions of the block. As if it was in double mode or something.

I’m gonna try and reboot the CNC.
If you have any suggestion, please let me know.

2

Rebooting the machine didn’t do any good. Still has the same issues. It appears that when the machine is commanded to move 0.5mm say, it moves twice as much with the control manual displaying the command number.

3

Sounds like some controller settings got changed, that shouldn’t have. I’ll come in this evening to look.