Planer Sticking 5/11

Hi,

I was working with the planer yesterday and the rollers were not pulling the wood all the way through. I confirmed that both rollers are turning, and I changed the feed speed to each setting to eliminate that as an issue. I also tried using a few different pieces of wood (including a pine 2x4 lying around the shop) to make sure that wasn’t an issue.

The planer bed was a little dirty/sticky, so I wiped it down as best I could (didn’t have any wax or anything). The rollers may also be dirty but I did not do anything with them.

Figured I’d post here so people are aware.

Tucker

Thank you for posting here. Discourse or any red QR code is a great way to report issues.