Noticed the other day that the coolant wasn’t running on the horizontal bandsaw. Tried a couple on/off cycles on the coolant switch and opening/closing the valve, but that was about all I knew how to do. When it first started a small amount of coolant came out then nothing. Not sure if the coolant is low or if there’s a clog in the lines somewhere. This was on Wednesday though and I forgot to post then, so maybe it’s fixed now?
1 Like
You can pour some water in the trough. The coolant gets low from splashing out and evaporation. If it is low you can dump about a quart in it safely without overfilling the reservoir.
1 Like
I added fluid and verified its working.
2 Likes