Hi! I’m getting into some sandblasting, and would like to laser cut the resist before applying it onto the porcelain that I then sandblast. I’d like to confirm that the polyester resist is an okay material to use in the blue laser. Can anybody confirm that this would not damage the laser?
Here’s the link to the product:
Thanks!!
Quick googling has found me this regulatory datasheet: https://multimedia.3m.com/mws/mediawebserver?mwsId=SSSSSu9n_zu8l00xM8_eMx_SNv70k17zHvu9lxtD7xt1evSSSSSS-
which, as far as I can tell, doesn’t list anything immediately alarming. @dannym would more likely be able to say for sure
Product Page: https://www.3m.com/3M/en_US/p/d/b40069659/
Other Info: Technical Data Sheet | 3M