6/9/2026 11:57:43 - 3D Printing - BambuLabs P1S - Zephyrus

Red / Yellow Tag
1

Problem Type: Equipment
Workspace: 3D Printing
Asset: BambuLabs P1S - Zephyrus
Summary: Possible nozzle clog
Additional Info: 3rd print of day could not get it to print 1st layer

Report generated from a filing. This report has also been sent to Asmbly staff, leadership, and space leads with any contact info that was provided. Provide additional photos or resources here to help. When the problem is resolved, ensure it is marked.

2

One of my prints failed first layer, petg- I tried heating to 300 and clearing the nozzle, then starting the print twice and failed to get a known project working.

3

Tested ut again this morning and it is working as expected.