Hiring/Gig: Need help laser etching 8 limestone blocks by Oct 23!

Hey everyone! I have a small project and am looking for a quick favor from anyone certified on the Big Lasers who has some open machine time this week.

I have eight 8x8 pre-cut natural limestone pieces that I want to engrave with a topographical map formation as a gift. I already have the digital files ready to go as grayscale heightmaps, but I don’t have time to take the safety classes before my hard deadline on October 23.

I’m on a tight hobby budget for this project, but I’m happy to cover your exact machine rental time/fees and throw in $20–$30 (or a six-pack of your favorite beer/pizza) for your time if you’ll let me tag along or run these for me.

Since the files are ready, it should be a quick process. Please DM me if you’re open to helping a fellow maker out this week. Thank you!

limestone turns out to be more problematic than it first seems.

the laser can remove material in a variable depth 3d relief. it does have some issue with the depth varying with the localized variation in stone composition

that’s not much to worry about. but what happens is the newly exposed surface begins a process called “slaking”. the newly exposed CaO adsorbs moisture from the air in hours/days into Ca(OH)2 and roughly doubles in volume. So the surface swells and cracks and may flake off, exposing more CaO and it repeats.

given time, carbonation Ca(OH)2 + CO2 → CaCO3 converts the slaked surface growth to something harder and stable.

I have seen this tried and initially it looks successful but then fuzzy slake growth consumes the detail in a few days and cleaning off the growth doesn’t really restore it. whether it can be processed- painting ammonium carbonate onto it right after cutting could instantly jump past the slaking step and go into the hard, stable carbonate state immediately without swelling and flaking- should work

1 Like

Wow, thank you so much for this warning! You just saved me from ruining all eight pieces. I had no idea about the ‘slaking’ process, but your explanation makes perfect sense.

Since my deadline is next week (Oct 23), I would love to try the ammonium carbonate method to lock in the detail right after etching.

I have two quick questions for you:

  1. Where is the best place locally or online to grab ammonium carbonate quickly? Is it something easily accessible?
  2. Since you clearly understand this material, would you happen to have any open laser time this week to help me run these blocks? I’d be incredibly grateful, and as mentioned, I’m happy to cover the machine fees and throw in $20–$30 or some beer/pizza for your time and expertise!

Let me know if you might be available, or if you have any tips on how to apply the wash effectively. Thanks again!