Some of you may know me as one of the woodshop safety instructors but I’m also involved with a STEM program down in the Baja peninsula of Mexico called Aventureros.
The program provides kids of this rural fishing town, Bahia de Los Angeles, an opportunity to get hands on and learn about things that otherwise just don’t exist for them. For example, despite being situated on a pristine coast that is teeming with incredible sea creatures the majority of the kids had never been out on a boat. They did a week long lesson on trash and the impact it has on the environment, followed by a “Basur-a-thon” where they collected over 600 lbs of trash, and were awarded a boat trip where they got to see a grey whale calving in the lagoon!
On to my ask…I’m looking to provide them with a 3D Printer and computer for CAD. I know we had several printers hanging out on the top shelf in the electronics lab so I was hoping to maybe fix up one of those or see if a member was looking to part ways with one for a good cause. Also, filament donations would be wonderful as well!
If you’re someone who is savvy with 3D printers and is willing to volunteer your time to help repair one that would be tremendous as well. I’m happy to take this on but it’s not my forte and I’m involved in other efforts there such as fundraising and the website revamp that we recently launched! So, anything I can offload helps free up time for these other things.
The Aventureros program is organized through the Vermilion Sea Institute (VSI) which is a registered non-profit if you’re looking for a tax write off I can get that arranged. Also, VSI is an active research station which does marine research in the Sea of Cortez and being a rural fishing village a 3D printer will be a HUGE help for odds and ends around the station. You can find out more about Aventureros and VSI from their website - https://vermilionseainstitute.org/impact/aventureros/ I’m also happy to answer any questions or provide more information!
There were a couple in the electronics lab and there are also a couple of older ones upstairs above the laser area. Once I complete this cabinet for the 3d Printer area I don’t have any issue with helping you getting something up and running. I’m sure the shop could part with at least the ones upstairs since they have such a thick layer of sawdust on them but that would have to go through @valerie and/or @EricP.
Yes, there are 2 or 3 3D printers that will be up for disposition. Happy to have first dibs go to this project (or all of them depending on other’s thoughts). My understanding is that they will need a bit of rehab though.
@dash3811 thank you for volunteering to help out! I was at the space yesterday and the 3d printer area is coming along wonderfully!
Thank you @valerie! Is there anything I should do on my end to get it cleared to take one (or 2)? I checked yesterday in the loft above the lasers, the craft area, and the electronics lab but didn’t see any printers. Have they moved or maybe they were hidden where I didn’t see them?
@Joshcross, yes they have moved to the classroom and you are welcome to first pick or all pick if you’d like for this project. There are 4 of them towards the left side of the classroom. Let me know which ones you grab so I can post about the others for disposition.
@valerie if at all possible I would like the space to hold onto one of the delta printers since we currently don’t have one. I just think it would be good to have as many types of machines if at all possible.
My understanding is that they’re in pretty meh condition, like they definitely need a good bit of rehab. I’d defer to @EricP and @JoeN on whether any of them are worth keeping for the space. It would also need to fit inside the enclosure you’re building along with the other printers that are already planned for in there.
I took a look on the classroom and saw 4. All but one of them seemed to be missing the bed from what I could tell. I’m not sure which are the delta printers but I did grab a picture of the one I would like to get fixed up for the kids if this is alright with everyone.
That one is fine as it is probably the most intact one of them all. And that one is a delta. Once I offload the 4 printers I have here I can take at look at it to see what may need to be fixed and what not. I could probably pull from the others for parts as long as that ok will @EricP. If you wouldn’t mind removing some of the layers of dust from it that would definitely be a huge help going forward. Is there a deadline for this to be done by?
@dash3811 I got the printer cleaned up and put it on the table next to the window with a note on it. Let me know if there is anything else I can do to help out or if you want to schedule a time to meet up.
We can meet up if you’d like. I also set a box of 3d printer items near the printer that i wanted to rummage through for possible parts. When is good for you?