Problem Type: Equipment
Workspace: Woodshop
Asset: Laguna Swift CNC 5x10
Summary: Z-Index changed between cuts
Additional Info: When the member’s second pass started the z-axis reset and a made a sound that seemed like resistance. when the tool lowered to make it’s next, deeper pass it was an inch or 2 above where it needed to be. No issue jogging the z to the top.
Report generated from a filing. This report has also been sent to Asmbly staff, leadership, and space leads with any contact info that was provided. Provide additional photos or resources here to help. When the problem is resolved, ensure it is marked.
i also had this happen, however, it was after 4 or 5 usb stick swaps and a machine reboot fixed it.
there was no sticking or grinding noise, it was just a z that started cutting 75mm above surface.
i also witnessed the machine not boot properly a few times the other week. the person using the cnc had to turn it off and on 3 times to get the display on the hand unit to show text. it was on, but blank. even after waiting a few minutes.
i used the machine last week with no hiccups at all though. just say’n.